VLSI
UNIVERSAL VLSI PROTOBOARD

A universal VLSI platform capable of integrating FPGA’s and CPLD’s from Xilinx/Altera in different packages like TQ/PQ packages. Its completely universal, supports multi-vendor devices from XC9500 CPLDs, Spartan-2 FPGA from Xilinx and ACEX 1k series of FPGAs and MAX7000s series of CPLD from Altera. This protoboard gives a complete learning experience in various PLD architectures and their features.
    

Technical Specifications
Multi-vendor device support for Xilinx and Altera PLDs.
Modules available in PLCC84, TQ144 and PQ208 packages (and other TQ/PQ packages).
Upto 140 user I/Os in Xilinx FPGA.
Interface to 4 X 7-Segment Multiplexed displays.
Interface to 16 digital inputs and outputs with LED indication.
4x4 membrane keypad.
RS232 interface with 9-pin D-type connector.
On board 8-MHz Clock oscillator (user selectable).
Power on Reset circuit and configuration reset key.
Byte-blaster cable interface for configuration of Altera FPGAs.
User selectable configuration modes, using either FLASH PROM / JTAG / Slave Serial.
With on boards regulators supporting 5V, 3.3V and 2.5V devices.
Support for different I/O Standards.
Complaint with Xilinx ISE series software.
Complaint with Altera Quartus-II design software.
Daughter Cards (Available with Universal protoboard)
Xilinx FPGA Spartan II
Altera ACEX FPGA
Xilinx CPLD
Altera MAX7000s CPLD		 XC2S50 PQ208-5C
EP1K50 TQ 144-3C
XC 9572 PLCC84-15C
EPM7128s PLCC84-15C
Note: User can select any combination of above adaptors.
Applications and Practicals
Display and Messaging applications.
Timer designs IC8254 and IC8253.
PC based applications.
8255 PPI design.
Design of 8/16/24/32 bit counters.
Adders and subtractors.
8/16/24/32 bit Shift register.
All digital logic gates and functions.
4/8/16 bit ALUs.    
FPGA VLSI PROTOBOARD
The FPGA VLSI Trainer Kit is a low cost platform for testing and verifying designs based on the Xilinx Spartan II and Altera ACEX series of FPGAs. The purpose of VLSI trainer is to teach the basic concepts of VLSI designing, HDL programming and digital system design.
Features & Specifications
Multivendor support for Altera and Xilinx FPGAs.
Four Multiplexed 7-Segment displays.
Interface to RS232 with 9-pin D-type connector.
Support various configuration modes.
On board 8 MHz Clock oscillator (choice for other oscillators also).
Configurable 24 switches as I/P or O/P.
16 digital LED indicated outputs.
Power on Reset and configuration reset key.
Support for different I/O Standards.
4x4 membrane keypad.
Optional Modules
Dual relay card.
16x2 character LCD display.
CPLD VLSI PROTOBOARD
The CPLD VLSI Trainer Kit is a low cost platform for testing and verifying designs based on the Xilinx 9500 and Altera MAX 7000 series of CPLDs. The purpose of VLSI trainer is to teach the basic concepts of VLSI designing, HDL programming and digital system design.
Features & Specification
Multivendor support for Altera and Xilinx CPLDs.
Four Multiplexed 7-Segment displays.
JTAG configuration mode.
On board 8 MHz Clock oscillator (choice for other oscillators also).
Configurable 24 switches as I/P or O/P.
16 digital LED indicated outputs.
Power on Reset key.
4x4 membrane keypad.